Difference between revisions of "Conversion dynode"

From MS Terms Wiki
Jump to navigation Jump to search
(→‎Related Terms: , Replaced: == Related Terms == ‚Äö√ú√≠ == See also ==, using AWB)
(→‎Alternate: clean up using AWB)
Line 6: Line 6:
  
 
{{DefName|
 
{{DefName|
A conversion [[dynode]] is used to increase the secondary emission characteristics for heavy ions and thus reduce the mass discrimination of the detector. A high potential, of opposite polarity to the ions detected, is used to attract these ions to the [[dynode]]. [[Secondary electron]]s are produced when the ions hit the [[dynode]] and are subsequently recorded via the detector used.
+
A conversion [[dynode]] is used to increase the secondary emission characteristics for heavy ions and thus reduce the mass discrimination of the detector. A high potential, of opposite polarity to the ions detected, is used to attract these ions to the dynode. [[Secondary electron]]s are produced when the ions hit the dynode and are subsequently recorded via the detector used.
 
}}
 
}}
  

Revision as of 22:07, 12 July 2009

Obsolete Template

Alternate

DRAFT DEFINITION
Conversion dynode

A conversion dynode is used to increase the secondary emission characteristics for heavy ions and thus reduce the mass discrimination of the detector. A high potential, of opposite polarity to the ions detected, is used to attract these ions to the dynode. Secondary electrons are produced when the ions hit the dynode and are subsequently recorded via the detector used.

Considered between 2004 and 2006 but not included in the 2006 PAC submission
This is an unofficial draft definition presented for information and comment.

Recommended terms | Full list of terms


See also