Difference between revisions of "Conversion dynode"

From MS Terms Wiki
Jump to navigation Jump to search
 
Line 11: Line 11:
  
 
K. Rinn, A. Muller, H. Eichenauer, E. Salzborn. Rev. Sci. Instrum. 53, 829 (1982). (http://dx.doi.org/10.1063/1.1137055 )  
 
K. Rinn, A. Muller, H. Eichenauer, E. Salzborn. Rev. Sci. Instrum. 53, 829 (1982). (http://dx.doi.org/10.1063/1.1137055 )  
 +
 +
 +
{{psims}}1000346
 
}}
 
}}
  
 
[[Category:Detection]]
 
[[Category:Detection]]

Latest revision as of 14:05, 14 September 2014

IUPAC RECOMMENDATIONS 2013
Conversion dynode
Surface that is held at high potential so that ions striking the surface produce secondary charged particles that are subsequently detected.


Note: For positive ions, the potential is negative and the secondary particles are electrons and negative ions. For negative ions, the potential is positive and the secondary particles are positive ions.
Related Term(s):
Reference(s):

R. J. Beuhler, L. Friedman. Int. J. Mass Spectrom. Ion Phys. 23, 81 (1977). (http://dx.doi.org/10.1016/0020-7381(77)80091-0 )

G. C. Stafford. Environ. Health Perspect. 36, 85 (1980). (http://dx.doi.org/10.1289/ehp.803685 )

K. Rinn, A. Muller, H. Eichenauer, E. Salzborn. Rev. Sci. Instrum. 53, 829 (1982). (http://dx.doi.org/10.1063/1.1137055 )

PSI-MS:

http://purl.obolibrary.org/obo/MS_1000346
From Definitions of Terms Relating to Mass Spectrometry (IUPAC Recommendations 2013); DOI: 10.1351/PAC-REC-06-04-06 © IUPAC 2013.

Index of Recommended Terms